LG Chocolate - Placing and Receiving Calls

THE BASICS
pg 7
7: The device will appear in Add New Device menu once it has been located.
Highlight the device and press the OK Key .
8: The handset will prompt you for the passcode. Consult the Bluetooth®
accessory instructions for the appropriate passcode (typically “0000”- 4 zeroes).
Enter the passcode and press the OK Key .
9: Once pairing is successful, select Always Ask or Always Connect and press
the OK Key .
0: Once connected, you will see the device listed in the Bluetooth® Menu and the
Bluetooth® device connected icon will show up on your enunciator
when connected to the Bluetooth® device. You can also check out the
connection with a blue icon on the list.
Placing and receiving calls
Placing calls
1: Make sure the phone is turned on.
If not, press for about three seconds.
If necessary, pull down and release the lock key.
2: Enter the phone number.
3: Press .
4: Press to end the call.
NOTE: Your phone has a Voice Commands feature that also lets you make calls by phone number,
name, or location.