14
Assembling and Preparing
2. Tighten the 3 screws provided in the package to secure the Stand Body and Stand Base in place.
size: M4 x 10
3. To disassemble the stand, repeat the process in reversed order.
Assembling the Body with the Stand
y
y Assembling the body and stand on the desk or other high places can run the risk of dropping the product on
the oor.
y Watch out for any dust or debris where you assemble the product, as the screen may be scratched or damaged.
CAUTION
!
1. Spread a soft cloth on the packaging box or a low table to protect the screen (panel).
2. Place the body on the packaging box or low table, align them at the edge, and make sure the screen is facing
downward.
한국어
ENGLISH
ENGLISH
To Next Page
Loading...
