Operating 15
Operating
3
Other Operations
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 64 tracks/les.
1. Insert a CD or a USB and wait for it to be
ordered.
2. Press PROGRAM/MEMORY on the remote
control in stop status.
3. Press
C
/
V
on the remote control or
Y/
U
on the unit to select a track/file.
4. Press PROGRAM/MEMORY on the remote
control again to save and select a next track/file.
5. Press
d
/
M
on the remote control or
T
on the
unit to play the programmed music tracks/files.
6. To clear your selection, press
Z
ENTER on the
remote control or
I
on the unit twice.
The programs are also cleared when the disc
or USB device is removed, the unit is powered
o or the function is switched to others.
,
Note
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing INFO.
Turn off the sound temporarily
Press
@
on the remote control to mute your
sound.
You can mute your sound, for example, to answer
the telephone, “MUTE ON” will appear for a while in
the display window.
To cancel it, press
@
again or change the volume
level. Then "MUTE OFF" will appear.
Listening to music from your
external device
The unit can be used to play the music from many
types of external device.
(Refer to the page 12)
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing
1
/
!
.
3. Select the PORTABLE function by pressing
FUNCTION on the remote control or FUNC. on
the unit.
4. Turn the external device and start playing
music.
Auto Power Down
This unit will be o itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
CM1930-DU_AESPLLK_ENG.indd 15 2013-03-15 2:07:18