EasyManuals Logo

LG CM9750 Simple Manual

LG CM9750
4 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Specication
ENGLISH
Power Requirements Refer to the main label on the unit.
Power Consumption
Refer to the main label on the unit.
Networked standby : 0,4 W
(If all network ports are activated.)
Bus Power Supply (USB) 5 V 0 500 mA
Amplier Total Output 3 000 W
Design and specications are subject to change without notice.
How to disconnect the wireless network connection or the wireless device
Turn o the unit by pressing the power button for more than 5 seconds.
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz. Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the same rating approved to BS 1362. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the
mains sockets in your home, then the plug should be removed and a suitable type tted. Please refer to the wiring instruc-
tions below: Warning: A mains plug removed from the mains lead of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with
the earth symbol 6 or coloured green or green and yellow. If any other plug is tted, use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in accordance with the following codes: - BLUE: NEUTRAL, BROWN:
LIVE - As the colours of the wires in the mains lead of this unit may not correspond with the coloured marking identifying
the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Additional Information
• The USB function of this unit does not support all USB devices.
• Using NTFS le system is not supported. (Only FAT(16/ 32) le system is supported.)
• External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
• The DTS is not supported. In case of DTS audio format, audio is not output.
,
Music File Requirement
Sampling frequency
y
MP3 : 32 - 48 kHz
y
WMA : 32 - 48 kHz
Bit rate
y
MP3 : 32 - 320 kb/s
y
WMA : 40 - 192 kb/s
Maximum les Data CD : 999 / USB : 2 000
Maximum folders Data CD : 99 / USB : 200
File extensions
y
.mp3”
y
.wma”
CD-ROM le format ISO9660+JOLIET
USB Flash Drive Devices that support USB2.0 or USB1.1.
Bluetooth Codec SBC
Safety Information
LG Sound Sync
a
b
Set up the sound output of your TV : TV setting menu
[ [Sound] [ [TV Sound output] [ [LG Sound Sync
(Wireless)]
Select LG TV function.
LG Sound Sync enables you to control some functions of this unit by a remote control of your LG TV.
Controllable functions are volume up/down and mute. Make sure that your TV has LG Sound Sync logo as shown above.
TV Speaker
External Speaker
LG Sound Sync (Optical)
LG Sound Sync (Wireless)
• For specic information of operating, refer to the instruction manual of your TV.
• If the connection fails, check the conditions of this unit and your TV : power, function.
• The amount of time to turn o this unit is dierent depending on your TV.
,
LG TV
PAIRED
LG TV
How to ax the Ferrite Core
Ferrite core may not be provided depending on each nation’s regulations.
a
Pull the stopper [a] of the ferrite core to open.
b
Wind the power cord around the ferrite core twice (Once for 110 V cord).
Wind the SPEAKERS cables around the ferrite core once. Wind the SPEAKER LIGHTING cables around the ferrite core
once.
c
Close the ferrite core until it clicks.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s enclosure
that may be of sucient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping
or splashing) and no objects lled with liquids, such as vases, shall
be placed on the apparatus.
WARNING: Do not install this equipment in a conned space such
as a book case or similar unit.
CAUTION: Do not use high voltage products around this product.
(ex. Electrical swatter) This product may malfunction due to
electrical shock.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating. The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar surface. This product
shall not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.To ensure proper
use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specied herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to
open the enclosure.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the
steps in reverse order than the assembly. To prevent contamination
of the environment and bring on possible threat to human
and animal health, the old battery or the battery put it in the
appropriate container at designated collection points. Do not
dispose of batteries or battery together with other waste. It is
recommended that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CM9750-FB.DKENHLK_MFL68903721_Sim_2.indd 2 2015-02-24  1:48:34

Other manuals for LG CM9750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG CM9750 and is the answer not in the manual?

LG CM9750 Specifications

General IconGeneral
Type-
Cassette deckNo
Product colorBlack
Number of decks1 deck(s)
Disc loading typeTray
Optical disc playerYes
Number of optical discs1 discs
Speaker type3-way
RMS rated power- W
Woofer diameter304.8 mm
Tweeter diameter25.4 mm
Number of speakers2
Mid-range driver diameter165.1 mm
Subwoofer driver diameter (imperial)12 \
Tuner typeDigital
FM band range87.5 - 108 MHz
Supported radio bandsFM
Headphone connectivity3.5 mm
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Microphone connectivity6.3 mm
Apple docking compatibilityNot supported
Disc types supportedCD, CD-R, CD-RW
Playback disc formatsCD audio
Audio formats supportedMP3, WMA
Volume controlRotary
Equalizer modesBass, Classic, Jazz, Pop, Rock
Power sourceAC
Weight and Dimensions IconWeight and Dimensions
Main unit weight6600 g
Main unit dimensions (WxDxH)450 x 355 x 160 mm

Related product manuals