LG CMS2460F - USB Recording Configuration; Selecting Recording Bit Rate; Selecting Recording Speed (X1;X2)

Operating26
Operating
3
To select recording bit rate and
speed
1. Press USB REC on the remote control for longer
than 3 seconds.
2. Use C/V on the remote control or
Y/U on the unit to select the bit rate.
3. Press USB REC on the remote control again to
select the recording speed.
4. Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed :
(AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC on the remote control to finish
the setting.
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
y You can check the recording percentage rate
for the USB record on the display window
during the recording.
(MP3/WMA/FLAC CD Only)
y During recording MP3/WMA/FLAC, there is no
sound.
y When you stop recording during playback, the
le that has been recorded at that time will be
stored. (Except MP3/WMA/FLAC les)
y Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete le may be made and not deleted
on PC.
y If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL” or
“NOT SUPPORT” is displayed on the display
window.
y Multi card reader device or external HDD
cannot be used for USB recording.
y A le is recorded by about 512 Mbyte when
you record for a long term.
y You may not store more than 2000 les.
y In case of the unsupported MP3/WMA/FLAC
le, the le recording may be stopped.
y It’ ll be stored as follows.
AUDIO CD MP3/WMA/FLAC
PORTABLE Tuner
Tuner : The current recording frequency is
shown.
,
Note