Operating 27
Operating
3
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press RDS/SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6. Press RDS/SET.
7. Select the minutes by pressing C/V on
the remote control.
8. Press RDS/SET.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 21)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM.
3. Press C/V on the remote control or
Y/U on the unit to change the hours and
minutes and press RDS/SET to save.
4. Press C/V on the remote control or
Y/U on the unit to select function and
press RDS/SET to save.
- Press C/V to select a memory No. when
you select tuner and then, press RDS/SET. If
there is no memory No., this step is skipped.
5. Press C/V on the remote control or
Y/U on the unit to change the volume
and press RDS/SET to save. The clock icon “(“
shows that the alarm is set.
y If you set the clock, you can check the time
by pressing CLOCK even when the player is
turned off.
y You can set alarm after you set the clock.
y If you set the clock and alarm, you can check
the alarm icon “(“ by pressing CLOCK even
when the player is turned off.
y If you set the clock and alarm, you can check
the alarm icon “(“ and setting information
by pressing ALARM even when the unit is
turned off.
y You can select ALARM on/off mode by
pressing ALARM.
,
Note
To Next Page
Loading...
