HOW TO UPDATE MCS PROGRAM
(1) Change the file name to download as “(MODEL NAME)__(function)_(Version).mcs”.
ex) CM2520_XXXX_XX.mcs
(2) Copy the file to the root folder of USB storage.
(3) Put the USB into the set. Change set function to USB function.
Then the upgrade process will be started with the upgrade intormation. FLD Display "UPGRADE".
(4) If the upgrade process is complete, the set will be rebooted with “SUCCESS” message
and set auto power off.
(5) Pull out the USB Storage. Press the power key.
1-7
PROGRAM UPDATE GUIDE
To Next Page
Loading...
Need help?
General
