EasyManua.ls Logo

LG CMS8360F - Advanced Operations; To Select Recording Bit Rate and Speed; Recording to USB; Pausing Recording

LG CMS8360F
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating
26
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, AUX, PORTABLE, FM, USB)
1. Connect the USB device to the unit.
2. Press F / WIRELESS LINK on the unit or F on the
remote control to select a Function you want to
record.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
JUKE BOX list recording - After showing the JUKE
BOX list, you can record it to USB.
(Refer to page 28)
3. Start the recording by pressing USB REC.
-If you connect both USB1 and USB2, press USB
REC when USB1 or USB2 which you want to
record blinks in the display window.
4. To stop recording, press
I
on the unit or
Z
on
the remote control.
Pausing recording
During recording, press
T
on the unit or
d
/
M
on
the remote control to pause recording. Press it again
to restart recording.
(FM/AUX/PORTABLE only)
y
You can control recorded MIC sound according
to MIC volume when you record in AUDIO CD
X1 speed REC.
y
VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
y
VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
,
Note
To select recording bit rate and speed
1. Press and hold USB REC for 3 seconds.
2. Press
C
/
V
on the remote control or rotate
Y
SEARCH
U
on the unit to select a bit
rate.
3. Press USB REC to set.
4. Press
C
/
V
on the remote control or rotate
Y
SEARCH
U
on the unit to select a
desired recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC to finish the setting.
USB Copying
You can copy audio les in USB 1 to USB 2.
1. Connect a USB device including desired sound
files to USB port (1) and select USB 1 Function.
2. Connect another USB device to USB port (2).
3. Press USB REC to start recording.
4. To stop recording, press
I
on the unit or
Z
on
the remote control.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights

Table of Contents

Related product manuals