14 INSTALLATION
7 Plug the power cord into the power outlet.
Using Double-Sided Tape to Secure the
Appliance
1 Use the double-sided tape a to attach the
wall anchoring block b to the charging
station.
• Remove the center section of double-sided
tape before attaching it to the wall
anchoring block.
2 Attach the second piece of double-sided tape
to the other side of the wall anchoring block
to secure it to the wall.
• Do not use double-sided tape on wallpaper.
Compact Installation
For safety and convenience, install the charging
station using the self-standing or wall-mounted
installation methods. If you choose not to install
the charging station, place it on a level floor for
charging or storage.
1 Connect the power adapter to the port on the
back of the charging station.
2 Place the charging station on a hard and level
floor.
3 Separate the extension pipe and nozzle from
the product body before charging or storing
the appliance.
4 Plug the power cord into the power outlet.
• Leaving the appliance on a level floor for a long
time with the extension pipe and nozzle
attached may damage the appliance.
Assembling the Appliance
Follow these steps to safely assemble the
appliance.
1 Firmly attach the extension pipe c, nozzle d,
or tool onto the product body a.
• To detach the extension pipe, press the
extension pipe release button
b.
2 Put the product body on the charging station.
•See Charging the Battery for instructions
on installing and charging the battery.
To Next Page
Loading...
