OPERATING INSTRUCTIONS
21
ENGLISH
• Cleaning air function is additional function and it might not be indicated or operated at the partial
product.
• Cleaning air function is possible only when product is running.
• If you want independent cleaning air drive, please setup cleaning air by pressing additional drive
button at ventilation drive.
* Some functions may not be operated and displayed depending on the product type.
Repeat pressing button
until icon flash.
The method to setup cleaning air
1
Operate or cancel Plasma
Purification function by pressing
button.
( icon appears/disappears on
display part up
to selection )
2
After setting, press button
to exit.
3
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25 seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
Sub function - Plasma Purification(Accessory)
Only products with humidifying function can use this.
1,MFL67870326,영영 17. 7. 18. 영영 3:27 Page 21
To Next Page
Loading...
Need help?
General
