10 INSTALLATION
INSTALLATION
Before Installing
Installation Overview
Please read the following installation instructions first after purchasing this dryer or transporting it to
another location.
a Choose the proper location.
b Level the appliance.
c Vent the appliance.
d Connect the inlet hose (for steam models)
e Connect the Gas / Electric dryer.
• Purchase a UL-listed, 3-wire or 4-wire power cord kit with UL-listed strain relief (electric dryer only)
f Plug in the power cord.
g Installation test and test run.
• Refer to the Test Exhaust System section in INSTALLATION.
To Next Page
Loading...
Need help?
General
