Before first use of the dryer
Before you u_ the dryer for the first time, there are some _in_ that you have to check.
After removing _ckage, you wiJ[ check the produd has no problem and is pro_rly installed.
1. U_ a level to adjust the I_s of the dryer.
2. Check some major _rts such as wa_r container, condenser, control panel and drum.
3. It Run the dryer for 5 minutes to make sure drum inside gets warm.
1. Turn power on.
First, press the Power button. The hldicator light
ab_we the button wi[[ become illuminat_
indicating that the machine is ready set to run.
2. Open the door.
3. Check the lint filter, water
container, and condenser.
The lint filter near the door, should be ernpti_
after or b_ore drying operation.
Open the d_×_rand check if lint filter is c[ean_.
ff not, please clean it referring to page 15.
Water container and condenser are also
check_ to be empti_ and cleaned for better
drying resu[t.
4. Place laundry into the drum a_er
The clothes should be sort_t by its fabric h/pe
and dryness [eve[ and all the strings and belts of
clothes should be secur_ before k_ing put into
the drum.
Push the you push laundry a[[ the way back to
k_p it away from the door sea[.
ff not, d_x_r sea[ and clothes may be damaged,
Turn om
Open the
Doon
Check the
Hntfilter.
To Next Page
Loading...
Need help?
General
