lroublesh
Error Mode
* LEDdisplays dE in ca_ of the door open. The door must be dosed and start
Button must _ pres_ for re-_eration.
High tem_rature and high humidity of will remain contained in dryer if the dryer suddenly stops due
to power failure or other causes while drying is in progress.
Leaving the wet clothes in the dryer may reduce durability of the dryer or have a bad effect on major
electrical parts.
O_n the door so that high temperature and high humidity discharges outside if the dryer stops for a
long time while drying is in progress.
EHE
This is indication to detect and inform high temperature and high humidity within the dryer if
it stops during a cycle. If this happens, take the clothes out, let the interior old the dryer dry
out, rel_d the clothes, and start the cycle over.
(Contad with the _rvice Center if such conditions continue even a_r leaving the door open
for a sufficient time.)
• ELE ELE error continues to occur, unplug the power cords and then call the Service Center.
" _ E unplug the power plug and call for _rvice.
To Next Page
Loading...
Need help?
General
