Instructions
Stacking Kit
In order to stack this dryer on an LG washing
machine, an LG stacking kit is needed.
Incorrect installation can cause serious
accidents.
The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more
experienced service personnel.
3. After detaching protection sheet of double-side
taFm, align stacking kit holes rear cover hoies
and then attach ta_ to the washer by pressing
hard.
....2&6inch(6OO mm 21 inch(550 ram)
........................................................................................................
Installation Procedure
1. Place the LG dryer on the LG Washing
machine.
2. Unscrew Rear cover in the Base by unscrewing
2 screws.
4, Assemble a stacking kit as following.
• Screw 2 screws which is unscrewed earlier to
assembledryer rear back and stacking kiL C/
Use accessoryscrews to assemblewasher rear cover
and stacking kiL #),®
The procedure for the opposite side will be the
same,