Clean Lint Filter
A clean lint filter reduces drying, reduces energy
consumption, and lengthens the dryer’s life.
The filter can be cleaned by vacuuming or by rinsing with
water.
Note:
If the Clean Filter indicator flashes during operation,
clean the filter promptly. (Allow the dryer to cool for a few
minutes to prevent injury from burning.)
Empty Water Container
If the dryer has not been installed with the optional drain
kit attached, the condensed water container should be
emptied after every use.
If the Empty Water warning lights and a buzzer sounds
while the dryer is operating, the container is full and must
be emptied within one hour.
Owner’s Maintenance
DLEC733W
To Next Page
Loading...
Need help?
General
