What to do if my LG Dryer will not turn on?
First, ensure the LG dryer is properly plugged into the outlet. Check your home's circuit breaker to see if it has tripped, or if there has been a power outage. Verify the outlet is grounded and matches the dryer’s rating plate. If a circuit overload is the issue, have a qualified electrician correct it.
Why is my LG Dryer not heating up?
Check if the circuit breaker has tripped or if there has been a power outage. Also, make sure that the gas supply and shutoff are both fully open.
How to prevent lint on clothes in LG DLEX3170?
Ensure that the lint filter is clean before you start the drying cycle. If some loads produce high amounts of lint, it may be necessary to clean the filter during the cycle.
How to reduce static in my LG Dryer?
The excess static in clothes after drying may appear because clothes are overdried or static builds up from synthetic blends. Use a recommended fabric softener and adjust the drying settings for a shorter drying time, or use SENSOR DRY cycles.
What to do if my LG Dryer display shows error code PS?
The dryer displays a wrong input command. Check the command input of the electronic control panel and refer to this model's manual.
What to do if the display of my LG Dryer shows FSSPS DPEF U& PS U&?
The system is malfunctioning. Reset the system and follow the manufacturer's instructions.
General| Type | Electric |
|---|---|
| Capacity | 7.4 cu. ft. |
| Steam | Yes |
| Sensor Dry | Yes |
| Number of Options | 5 |
| Reversible Door | Yes |
| Color | White |
| Dryer Venting | Vented |
| Wrinkle Care Option | Yes |
| Moisture Sensor | Yes |
| Energy Star Certified | Yes |
| Width | 27 inches |
| Height | 39 in |
To Next Page
