How to fix LG Dryer that will not turn on?
If your LG dryer won't turn on, first ensure the power cord is securely plugged into a grounded outlet that matches the dryer's rating plate. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary, but do not increase the fuse capacity. If a circuit overload is the issue, have it fixed by a qualified electrician.
Why is my LG DLEX3250 not heating?
If your LG dryer isn't heating, check your home's fuses and circuit breakers. Reset any tripped breakers or replace blown fuses, without increasing the fuse capacity. If a circuit overload is causing the problem, consult a qualified electrician to correct it. For gas models, also verify that both the house gas shutoff and the dryer gas shutoff are fully open.
Immediate actions to take if a gas leak is detected to prevent fire, explosion, or injury.
Essential safety guidelines for operating the dryer to reduce risks of fire, electric shock, and injury.
Proper grounding procedures for the dryer to prevent electric shock hazards and ensure safety.
Safety measures to follow during dryer installation to prevent fire, shock, injury, or property damage.
Specific safety warnings and precautions for using the dryer's steam functions.
Guidelines for safely connecting the dryer to the electrical power supply to prevent hazards.
Overview of the dryer's user-friendly control panel and the easy-access reversible door.
Details on steam functions, duct blockage sensing, and smart diagnosis troubleshooting.
Identification of included and optional parts and accessories for the dryer.
A step-by-step preview of the dryer installation process.
Recommended location criteria and requirements for installing the dryer.
Specifies required clearances around the dryer for proper installation and ventilation.
Instructions on how to properly level the dryer for optimal performance and stability.
Step-by-step guide on how to reverse the dryer door's swing direction.
Instructions for installing an optional side vent kit to change dryer exhaust direction.
Guidelines for proper dryer venting to ensure safety and efficiency.
Detailed instructions and safety precautions for connecting the gas supply to the dryer.
Detailed instructions and safety precautions for connecting the electrical supply to the dryer.
Specific installation guidelines for manufactured or mobile homes to ensure safety compliance.
Tests to perform after installation to ensure proper heating, airflow, and levelness.
Procedure to test the dryer's exhaust system for restrictions and ensure proper airflow.
Step-by-step guide on starting, operating, and ending a drying cycle.
A guide detailing available cycles, fabric types, temperature, and options.
Instructions on sorting laundry and properly loading the dryer for best results.
Explains how to use buttons to adjust dryness level, temperature, and time.
Details on special functions like Child Lock, Rack Dry, and Damp Dry Signal.
How to save custom programs and utilize steam functions for fabric care.
Instructions for cleaning the dryer's exterior, interior, lint filter, and surrounding areas.
Guidelines for checking and cleaning the dryer's exhaust ductwork to ensure optimal performance.
Common dryer problems and their potential causes and solutions before contacting service.
Procedures for diagnosing and resolving issues related to restricted or blocked dryer ductwork.
Further troubleshooting tips and information, including error codes and common issues.
Step-by-step guide for installing the optional stacking kit for washer and dryer.
To Next Page
General
