- You can also check the existing
cycles already downloaded.
- When a Tag On screen
appears (see at right), tap
your smart phone on the Tag
On icon on the right side of
the washer‘s control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the detailed
guide.(This might happen due
to the different NFC antenna
positions for each phone.)
- Check whether the new cycle
is downloaded by turning
the cycle selector knob to the
Download Cycle.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
Tag On Cycle Download
- Install the application from the Play store and run it.
- Select “Tag On” by using the
home card or the icons at the
bottom of the screen.
- When a Tag On screen appears
(see at right), tap your smart
phone on the Tag On icon on
the right side of the washer‘s
control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the detailed
guide.(This might happen due
to the different NFC antenna
positions for each phone.)
HOW TO USE
To Next Page
Loading...
Need help?
General
