LG DLEX5000V - User Manual

Questions and Answers

J
Jeff ParsonsAug 19, 2025
Why LG Dryer not turning on?
- R
  robinburkeAug 19, 2025
  Your LG dryer might not be turning on because the power cord isn't properly plugged into the grounded outlet. Ensure the plug is securely connected to an outlet that matches the dryer's rating plate. Also, check if a house fuse is blown, the circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse. If it is a circuit overload, have it corrected by a qualified electrician.
C
cwigginsAug 21, 2025
What to do if my LG Dryer does not heat?
- Z
  zramosAug 21, 2025
  If your LG dryer isn't heating, first check if a house fuse is blown, the circuit breaker has tripped, or there's a power outage. Reset the breaker or replace the fuse, without increasing its capacity. For gas models, ensure both the house and dryer gas shutoffs are fully open. Also, if you're using the Cotton/Normal cycle, deselect the Energy Saver option, as it adds an air dry section, and it's normal to feel no heat at the beginning of the cycle in this mode.
W
webbrobertAug 25, 2025
How to fix an LG DLEX5000V that won't turn on?
- K
  Kayla DurhamAug 25, 2025
  If your LG Dryer won't turn on, ensure the power cord is securely plugged into a grounded outlet that matches the dryer's rating plate. Also, check your house fuse or circuit breaker. Reset the breaker or replace the fuse, but do not increase the fuse capacity. If a circuit overload is the issue, have a qualified electrician correct it.
J
Joshua SmithAug 26, 2025
Why is my LG DLEX5000V not heating up?
- A
  Amanda MichaelAug 26, 2025
  If your LG Dryer isn't heating, first check your house fuse or circuit breaker and reset it or replace the fuse if needed, without increasing its capacity. For gas models, ensure both the house gas shutoff and the dryer gas shutoff are fully open. Also, if you're using the Cotton/Normal cycle, try deselecting the Energy Saver option, as it adds an air dry section at the beginning, which means you won't feel heat right away.
V
Victor ChristensenAug 28, 2025
Why is there lint on clothes after drying in my LG Dryer?
- D
  Deborah WhiteAug 28, 2025
  If you notice lint on clothes after drying in your LG dryer, ensure you clean the lint filter before every load and, for loads producing a lot of lint, during the cycle. Sort your laundry properly, separating lint producers from lint trappers. Also, avoid overloading the dryer by dividing larger loads into smaller ones, and always check pockets for tissues or paper before washing and drying clothes.
R
Rhonda Clark MDAug 30, 2025
How to prevent lint on clothes in LG DLEX5000V?
- R
  Robert WilliamsAug 30, 2025
  To prevent lint on clothes when using your LG Dryer, clean the lint filter before every load, and possibly during the cycle if you're drying items that produce a lot of lint. Sort your laundry properly, separating lint producers from lint trappers. Avoid overloading the dryer by dividing larger loads into smaller ones. Always check pockets thoroughly before washing and drying clothes to remove any tissue or paper.
C
Connie CrosbySep 1, 2025
What to do if LG Dryer shows error code tE1 or tE2?
- C
  charles97Sep 2, 2025
  If your LG Dryer displays error code tE1 or tE2, it means the thermistor is malfunctioning. Turn off the dryer and call for service.
E
Elizabeth SmithSep 3, 2025
Why excess static in clothes after drying in LG DLEX5000V?
- K
  Kenneth RobinsonSep 3, 2025
  If you have excess static in clothes after drying with your LG dryer, it may be caused by not using fabric softener, or using it incorrectly. Make sure to use fabric softener correctly. Overdrying laundry can also cause static, so adjust settings for a shorter drying time or use SENSOR DRY cycles. Static buildup can also happen when drying synthetics, permanent press, or synthetic blends; try using a fabric softener with these materials.
D
David HermanSep 5, 2025
What to do if greasy or dirty spots on clothes after using LG DLEX5000V Dryer?
- F
  feliciawoodSep 6, 2025
  If you find greasy or dirty spots on clothes after using your LG dryer, confirm that you are following the instructions provided with your fabric softener. Also, ensure you're only drying clean items, as dirty items can soil clean clothes. Stains on dried clothes may be stains that were not removed during the washing process, so make sure clothes are being completely cleaned according to the instructions for your washer and detergent.
L
Luke DuncanSep 7, 2025
What to do if my LG DLEX5000V display shows error code tE1 or tE2?
- D
  Derek LynchSep 8, 2025
  If your LG dryer display shows the error code tE1 or tE2, it means that the thermistor is malfunctioning. Turn off the dryer and call for service.

LG DLEX5000V Specifications

General

Appliance Category	Dryer
Type	Electric Dryer
Capacity	7.4 cu. ft.
Sensor Dry	Yes
Steam Technology	Yes
Wi-Fi Connectivity	Yes
Steam Refresh	Yes
Steam Sanitary	Yes
Number of Options	12
SmartDiagnosis	Yes
NFC Tag On	Yes
Color	Graphite Steel
Control Type	Electronic
Steam Function	Yes
Energy Star Certified	Yes
Voltage	240V
Weight	130 lbs
Options	Wrinkle Care
Width	27 in
Height	39 in
Depth	29 1/2 in