Why are clothes shrinking in my LG DLEX5680 Dryer?
If your clothes are shrinking after drying in your LG dryer, be sure to follow the care instructions for your garments. Use a low or no heat setting when drying to prevent shrinking.
Is it normal if water drips from door during Steam Cycle of LG DLEX5680?
Some condensation may drip out the bottom of the door during steam operation of your LG dryer. This is normal.
Is it normal if water drips from nozzle when Steam Cycle starts in LG Dryer?
Water will drip for a moment as the Steam Cycle begins in your LG dryer. This is normal.
Why can't I see steam vapor at beginning of cycle in LG DLEX5680 Dryer?
If you cannot see steam vapor at the beginning of the cycle in your LG dryer, confirm that the dryer is set correctly to allow for steam generation.
What to do if drum does not turn during Steam Cycle on LG DLEX5680?
To address a drum that isn't turning during the Steam Cycle on your LG dryer, ensure the dryer is set to operate correctly and check if the drum is obstructed.
Why is there no steam but no error code on my LG DLEX5680?
If steam is not generating in your LG dryer but no error code is shown, check the power supply and ensure it is functional.
How to remove odors from clothing after Steam Fresh in LG DLEX5680?
If odors remain in clothing after using the Steam Fresh™ cycle on your LG dryer, consider running a longer steam cycle or use a normal cycle for better results.
Why are garments still wrinkled after Steam Fresh in LG Dryer?
If garments are still wrinkled after using the Steam Fresh™ cycle on your LG dryer, ensure the correct load size is selected. This allows optimal steam to remove wrinkles effectively.
What does four bars on the Flow Sense indicator mean for LG Dryer?
If the Flow SenseTM indicator on your LG dryer shows four bars during the drying cycle, it indicates a restriction in the ductwork due to lint buildup or debris. Clean the ductwork to reduce any restrictions.
How to fix an LG DLEX5680 that will not turn on?
If your LG dryer won't turn on, ensure it's properly plugged into a grounded outlet matching the dryer’s rating plate. Check the power supply to confirm it is functional and that the circuit breaker hasn't tripped, or that a power outage hasn't occurred. If a circuit overload is the issue, consult a qualified electrician to correct it.
Steps to take if natural gas is detected.
Safety guidelines for installation and electrical connections.
Instructions for connecting the exhaust vent and ductwork.
Detailed connection procedures for gas and electric dryers.
Final verification tests for proper operation.
Step-by-step guide for cleaning the dryer's lint filter.
Steps to take if natural gas is detected.
Safety guidelines for installation and electrical connections.
Instructions for connecting the exhaust vent and ductwork.
Detailed connection procedures for gas and electric dryers.
Final verification tests for proper operation.
Step-by-step guide for cleaning the dryer's lint filter.
To Next Page
General
