To Next PageTo Next Page
Need help?Do you have a question about the LG DLG2524W and is the answer not in the manual?
Critical safety warnings including electrical disconnection and gas leak procedures.
Guidance on preventing damage to electronic components from static electricity.
Lists optional accessories available for the dryer, with references to other pages.
Step-by-step guide for installing the dryer rack inside the drum.
Detailed instructions for safely installing the stacking kit for a dryer.
Guide on how to install the dryer onto an optional pedestal base.
Details on connecting electric dryers, including 4-wire and 3-wire wiring methods.
Instructions for connecting the gas supply pipe to a gas dryer.
Explains sensor dry cycles including temperature, time, and dryness levels.
Explains manual dry cycles including speed dry and air dry options and times.
Procedures for testing thermal cut-offs, thermostats, door, and idler switches.
Testing methods for key components like heater, thermistor, motor, and gas valve.
Procedures for testing the igniter and frame detect components.
Testing procedures for outlet thermostats with auto and manual reset functions.
Diagram and explanation of the centrifugal switch in stop and run modes.
Visual representation of the Printed Wire Board (PWB) assembly and its components.
Schematic showing electrical connections for the electric dryer model.
Schematic showing electrical connections for the gas dryer model.
Instructions on how to enter the diagnostic test mode on the dryer.
Procedure to check the 120VAC electrical supply to the dryer's controller.
Steps to measure thermistor resistance to diagnose temperature sensor issues.
Procedure to test motor resistance and verify its operation for rotation and fan function.
Steps to test the moisture sensor's accuracy and its relation to dryness levels.
Procedure to test the door switch for proper sensing of door open/closed states.
Steps to test the heater switches and associated thermostats in electric dryers.
Procedure to test gas valve voltage and terminal resistance for gas dryers.
Instructions for adjusting gas valve settings and changing orifices between natural and propane gas.
Explains the flow of gas through the valve and its internal structure.
Step-by-step guide to remove the top plate of the dryer for servicing.
Instructions for disassembling the dryer's control panel and its components.
Steps to remove the outer cabinet cover of the dryer.
Procedures for disassembling the tub drum and the main drum assembly.
Instructions for modifying the dryer's exhaust duct configuration.
Steps to disassemble the filter assembly and blower housing.
Procedures for removing the air duct and drum rollers.
Visual breakdown of the control panel and associated plates.
Visual breakdown of the dryer's cabinet and door components.
Visual breakdown of the electric dryer's drum and motor assembly parts.
Visual breakdown of the gas dryer's drum and motor assembly parts.
General
