To Next PageTo Next PageHow to reduce static in my LG Dryer?
The excess static in clothes after drying may appear because clothes are overdried or static builds up from synthetic blends. Use a recommended fabric softener and adjust the drying settings for a shorter drying time, or use SENSOR DRY cycles.
What to do if my LG DLG3171 Dryer display shows error code PS?
The dryer displays a wrong input command. Check the command input of the electronic control panel and refer to this model's manual.
What to do if my LG DLG3171 will not turn on?
First, ensure the LG dryer is properly plugged into the outlet. Check your home's circuit breaker to see if it has tripped, or if there has been a power outage. Verify the outlet is grounded and matches the dryer’s rating plate. If a circuit overload is the issue, have a qualified electrician correct it.
Why are my clothes still wrinkled after using STEAM FRESH™ on my LG DLG3171?
If your LG Dryer leaves garments still wrinkled after using the STEAM FRESH™ option, it may be due to overloading or mixing different types of garments. For best results, use small loads of 1 to 5 similar items.
What to do if garments are too damp or too dry after REDUCE STATIC cycle on my LG DLG3171?
If your garments are too damp or too dry after using the REDUCE STATIC option on your LG Dryer, it's likely that the correct drying options weren't selected. You should manually select the load weight before starting the REDUCE STATIC option.
How to remove odors from clothing after using STEAM FRESH™ cycle in my LG DLG3171?
If odors remain in clothing after using the STEAM FRESH™ cycle on your LG Dryer, it means that the STEAM FRESH™ cycle did not remove the odor completely. For fabrics with strong odors, it's recommended to wash them in a normal cycle.
What to do if steam doesn’t generate but no error code is shown on my LG DLG3171 Dryer?
If steam doesn’t generate in your LG Dryer but no error code is shown, it is due to a water level error. Unplug the dryer and call for service.
Why are there no creases left on garment after STEAM FRESH™ cycle in my LG DLG3171 Dryer?
If there are no creases left on garment after STEAM FRESH™ cycle in your LG Dryer, it is because the function of this cycle is to remove wrinkles from fabric. Use an iron to make creases.
Why does water drip from the nozzle when the steam cycle starts on my LG DLG3171 Dryer?
If water drips from the nozzle when the steam cycle starts on your LG Dryer, it is normal. This is just steam condensation, and the dripping will stop shortly.
Why do garments have static after REDUCE STATIC cycle in my LG Dryer?
If garments have static after using the REDUCE STATIC option on your LG Dryer, it is normal and depends on the individual moisture level in the skin.
General| Brand | LG |
|---|---|
| Model | DLG3171 Series |
| Type | Gas Dryer |
| Capacity | 7.3 cu. ft. |
| Steam Technology | Yes |
| Sensor Dry | Yes |
| Weight | 120 lbs |
| Width | 27 inches |
| Reversible Door | Yes |
| Color | White |
| Wrinkle Care Option | Yes |
| Energy Star Certified | Yes |
| Height | 39 inches |
