36 37
Test 10
Generator Assembly
Before measuring resistance, be sure to turn Power off, and do voltage discharge.
(When discharging, contact the metal plug of Power cord with earth line.)
ྙ
During Steam cycle, Generator Assembly is not heating.
ྚ
During Diagnostic Test, tE4 Error occurs.
Turn the Dryer’s Power Off, then measure resistance.
Is resistance 14.3 Ω(
·
5%) between Heater
terminal
ྙ
and
ྚ
?
YES
NO
• Replace the
Generator
Assembly
• If measured
resistance value is
˳, replace the
Generator
Assembly too.
Normal condition
Caution
Trouble Symptom
Measurement Condition
To Next Page
Loading...
Need help?
General
