39
OPERATION
Sensor Dry Cycles
Sensor dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
NOTE
To protect your garments not every dryness level,
temperature, or option is available with every
cycle. See the Cycle Guide for details.
Manual Dry Cycles
Use manual dry cycles to select a specific amount
of drying time and a drying temperature. When a
manual dry cycle is selected, the Estimated Time
Remainng display shows the actual time remaining
in your cycle. You can change the actual time in the
cycle by pressing More Time or Less Time.
Protocol P154
Sanitization Performance of
Residential Clothes dryer
C
E
R
T
I
F
I
E
D
D
E
S
I
G
N
CERTIFIED BY NSF/P154
NSF International (formerly the National Sanitation
Foundation), certifies that the Anti-Bacterial cycle
reduces 99.9% of bacteria on laundry, and none of
the bacteria will carry over onto the next laundry load.
•
The default settings for the Anti-Bacterial cycle
are High temperature and Very Dry. These default
settings cannot be changed.
•
Do NOT use this cycle with delicate items or
fabrics.
MFL70442605_en_190215.indd 39 2019-02-15 오후 2:38:26
To Next Page
Loading...
Need help?
General