LG DSN9YG - Technical Specifications; General and Connectivity Specifications; Amplifier Output Specifications

Appendix 53
Appendix
5
Specifications
General
Power requirements Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Networked standby : 6.5 W
(If all network ports are activated.)
Dimensions (W x H x D) Approx. 1220.0 mm x 57.0 mm x 145.0 mm (with foot)
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 90 %
Bus Power Supply (USB) 5 V
0
500 mA
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz
Available Digital Input Audio format Dolby Atmos, Dolby Audio, DTS:X, DTS-HD, PCM
Input/Output
OPTICAL IN 3 V (p-p), Optical jack x 1
HDMI IN 19 Pin (Type A, HDMI™ connector) x 1
HDMI OUT
19 Pin (Type A, HDMI™ connector) x 1
1080p, 1080i, 720p, 576p, 480p
2160p@24/25/30 Hz 4:4:4
2160p@60/50 Hz 4:2:0
4K Sources dependent on HDCP 2.3 are supported at 4K resolutions.
Amplier (RMS Output)
Total 520 W RMS
Front 40 W RMS x 2 (4
Ω
at 1 kHz, THD 10 %)
Center 40 W RMS (4
Ω
at 1 kHz, THD 10 %)
Surround 40 W RMS x 2 (4
Ω
at 1 kHz, THD 10 %)
Top 50 W RMS x 2 (4
Ω
at 1 kHz, THD 10 %)
Subwoofer 220 W RMS (3
Ω
at 80 Hz, THD 10 %)