LG DSPD7Y User Manual

47
The product volume
is low
• Check the following and change the settings accordingly.
- When the product is connected to a TV, press the Settings button on the TV
remote control, select the [Speaker] menu, and change the [Digital Sound Output]
setting from [PCM] to [AUTO] or [BITSTREAM].
- If the product is connected to a playback device such as a DVD player or Blu-ray
disc player, go to the connected device's Settings menu. Change the [Digital Sound
Output] setting from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM]. Set
the [DRC] of the connected device to [OFF].
- If the product's Night Time mode is on, turn it off by pressing the Settings
button and Left/Right and then Up/Down.
The product fails
to recognise a USB
storage device
• TheproductmaynotsupporttheleformatoftheUSBstoragedevice.Formatthe
USB storage device and reconnect it. When formatting, refer to the USB storage
deviceformatssupportedbytheproductandselectanappropriateleformat.([
See "Connecting to a USB Storage Device" on page 38.)
A Bluetooth device
cannot be paired
• Press the Settings button on the Bluetooth device and check whether the
Bluetooth function is enabled. If Bluetooth is enabled, turn it off and on, then try
again.
• Remove any obstacles between the product and the Bluetooth device.
• Bluetooth pairing (connection) may not work properly depending on the Bluetooth
device type or the surrounding environment.

LG DSPD7Y Specifications

General

Brand	LG
Model	DSPD7Y
Category	Speaker System
Language	English