LG Duct series User Manual

En-4
OPERATION
Press the ENERGY SAVE button to start or stop the energy-sav-
ing air conditioner operation.
For details on the function, refer to page 9.
ENERGY
SAVE
THERMO
SENSOR
Child lock function
DAY OFF
DELETE SET
SET BACK
DAY
CLOCK ADJUST
Press the DAY (DAY OFF) button and SET button simulta-
neously for 2 seconds or more to activate the child lock
function and lock all buttons on the remote controller.
Press the buttons again for 2 seconds or more to deacti-
vate the child lock function.
When the child lock function is activated, the
mark
appears. If any button is pressed during the child lock,
the
CL display flashes.
Room temperature sensor selection
Press the THERMO SENSOR button to select whether the
room temperature is detected at the indoor unit (remote
sensor) or the remote controller.
When the
thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service
personnel when using this function.
• If this function is locked, the location where the room temperature is detected cannot be changed and the
mark flashes when the THERMO SENSOR button is pushed.
Indoor unit
Energy save
9373117049P1-14EN 05.2.18, 12:314

LG Duct series Specifications

General

Cooling Capacity	Varies by model
Heating Capacity	Varies by model
Energy Efficiency Ratio (EER)	Varies by model
Seasonal Energy Efficiency Ratio (SEER)	Varies by model
Heating Seasonal Performance Factor (HSPF)	Varies by model
Airflow Rate	Varies by model
Refrigerant	R410A
Noise Level	Varies by model
Control	Remote Control
Fan Type	Centrifugal
External Static Pressure	Varies by model
Power Supply	Varies by model
Dimensions (Indoor Unit)	Varies by model
Dimensions (Outdoor Unit)	Varies by model
Weight (Indoor Unit)	Varies by model
Weight (Outdoor Unit)	Varies by model
Type	Duct