LG E12EL - Auto Operation; Auto Changeover Operation

Cooling-only models
Auto operation
(Artificial intelligence)
In this mode, the fan speed and the tempera-
ture adjust automatically, based on the room
temperature.
1 Press dto turn on the power.
2 Press frepeatedly to select auto opera-
tion.
3 Press
[
or
]
to select the desired opera-
tion code if the temperature is higher or
lower than the desired temperature.
Auto Changeover operation
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C.
1 Press dto turn on the power.
2 Press frepeatedly to select the auto
changeover operation.
-
C is displayed on the display screen.
3 Press
[
or
]
to set the desired tempera-
ture.
- The temperature range is 18°C - 30°C.
4 Press g repeatedly to select the fan
speed.
ADVANCED FUNCTIONS
14
ENGLISH
NOTE
!
This function may not be supported,
depending on the model.
Code Description
2 Cool
1 Cool slightly
0 Maintain
room
temperature
-1 Heat slightly
-2 Heat
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.