LG E1942C-BN User Manual (English)

Questions and Answers:

A
Angel GonzalezJul 30, 2025
What to do if no image appears on my LG Monitor?
- C
  clopezJul 30, 2025
  If no image appears on your LG Monitor, here are some things to try: First, ensure the power cord is properly connected to the power outlet. Next, press the Power button on the monitor. If the power indicator is red, adjust the brightness and contrast. If the power indicator is flickering, the display might be in power saving mode; try moving the mouse or pressing any key on the keyboard. Also, ensure that your PC is turned on. If none of these steps work and you see 'No-Signal' for 5 minutes, the monitor goes to DPM mode.
B
bethweissAug 4, 2025
How to stop my LG E1942C-BN Monitor screen from blinking?
- J
  jallenAug 4, 2025
  To stop your LG Monitor screen from blinking, check if the screen is set to interlace mode. If it is, change it to the recommended resolution.
C
Chris MooreAug 9, 2025
How to fix an incorrect display image on my LG Monitor?
- A
  aaron70Aug 9, 2025
  To correct the display image on your LG Monitor, try these steps: First, press the AUTO button to automatically adjust the display image to the ideal setting. Also, check Control Panel ? Display ? Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Finally, ensure that the color setting is higher than 24 bits (true color).
A
Alexis RodriguezAug 14, 2025
Why is the screen color mono or abnormal on my LG E1942C-BN Monitor?
- G
  grayjenniferAug 14, 2025
  If the screen color on your LG Monitor is mono or abnormal, check the following: Ensure the signal cable is properly connected, using a screwdriver to fasten it if necessary. Also, make sure the video card is properly inserted in its slot. Finally, verify that the color setting is set higher than 24 bits (true color) in Control Panel ? Settings.
J
Jennifer EdwardsAug 19, 2025
What to do if I see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on my LG E1942C-BN?
- D
  David SnyderAug 19, 2025
  If you see an 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on your LG Monitor, ensure that you install the display driver from the display driver CD (or diskette) that came with your display. Also, make sure to check if the video card supports Plug&Play function.
D
Diane CrawfordAug 25, 2025
How to unlock OSD on LG Monitor?
- R
  Roberta HenryAug 25, 2025
  To unlock the OSD controls on your LG Monitor, push the MENU button for several seconds until the message 'OSD UNLOCKED' appears.

LG E1942C-BN Specifications

General

3D	No
Panel type	TN+Film
Pixel pitch	0.082 x 0.24 mm
Aspect ratio	16:9
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Display technology	LED
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1366 x 768
On/off switch	Yes
DVI-I ports quantity	0
Certification	UL, CUL, FCC-B, CE, TUV, TCO5-2
Product color	Black
LED indicators	Power
Number of OSD languages	17
Panel mounting interface	75 x 75 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	15 W
Package depth	115 mm
Package width	505 mm
Package height	339 mm
Package weight	3200 g
Cables included	VGA
Sustainability certificates	EPEAT Gold, ENERGY STAR

Weight and Dimensions

Depth (with stand)	168 mm
Height (with stand)	349 mm
Weight (with stand)	2100 g
Depth (without stand)	35 mm
Width (without stand)	441 mm
Height (without stand)	275 mm
Weight (without stand)	1900 g