ow to use washer
H
20
Water Temp.( )
• By pressing the Temp.
button, the water
temperature can be
selected.
- Cold
- 30˚C / 40˚C / 60˚C / 95˚C
• Water temperature can be selected according
to the program.
The required temperature lamp will light up for
identification.
For the more detailed information, please refer to
the page14.
Time Delay( )
Preparing washing before starting “Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in the
drawer.
• How to set “Time Delay”
- Press Power button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause button.
(“:” blinks.)
• If Time Delay button is pressed, “3:00” is
displayed. The maximum delayed time is 19
hours and the minimum time is 3 hours.
• Each pressing of the button advances on time
delay by one hour.
• To cancel the time delay, press the Power
button.
• Time Delay is ‘expected time’ from the present
to the completion of washing cycle or selected
process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
To Next Page
Loading...
