21
ow to use washer
H
• If the machine encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Over load in motor
“ ” : Over load in motor
“ ” :
The washer experienced a power failure.
If these error letters are displayed, please refer to
the troubleshooting page 26 and follow the guide.
Display
• When child lock is selected, the
“ ” is displayed.
• When time delay is selected, it shows the
remaining time to finish the selected program.
• When washing cycle is completed,
“ ” is displayed on the “Multi display”.
• During washing cycle, the remaining washing time
is displayed.
• Recommended program by manufacturer.
- Cotton
( )
: around 1 hour and 52 minutes
- Cotton Quick( ) : around 1 hour and 26 minutes
- Synthetic( ) : around 1 hour and 15 minutes
- Quick 30( ) : around 30 minutes
- Rinse+ Spin( ) : around 20 minutes
- Hand Wash/Wool( ) : around 51 minutes
- Delicate( ) : around 57 minutes
- Duvet( ) : around 1 hour and 9 minutes
- Bio Care( ) : around 2 hours and 14 minutes
- Baby Care( ) : around 1 hour and 54 minutes
- Boiling Care( ) : around 2 hours and 17 minutes
- Bulky( ) : around 59 minutes
- Spin( ) : around 15 minutes
• The washing time may vary by the amount of
laundry, water pressure, water temperature and
other washing conditions.
• If an unbalanced load is detected or if the suds
removing program operates, the wash time may
be extended.
(Max. increasing time is 45 minutes.)
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnosis display
To Next Page
Loading...
