49
PROGRAMMING MODE - SETUP MODE
Enter setup mode.
You will see LqC1
Button Display
Press the
Hot
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Display previous Prewash time.
Press
Warm(+)
or
Cold(-)
button to select prewash time
between
4
and
8
.
Press the
Start
button.
The machine sets up the prewash time, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
16. Prewash time setup
Prewash time setup can be used to set the time for prewash.
To Next Page
Loading...
