LG F1069FDF - Page 67

66
PROGRAMMING MODE - SETUP MODE
Enter setup mode.
You will see LqC1
Button Display
Press the
Hot
button.
Press the
Warm
or the
Cold
button until appears
in the display.
Press the
Start
button.
Press the
Warm
or the
Cold
button until appears
in the display. Press the
Start
button.
Press the
Warm
or the
Cold
button until appears
in the display. Press the
Start
button.
Press the
Warm(+)
or
Cold(-)
button to select the
Number of custom course. (1~20)
Press the
Start
button. The machine sets up the number
of custom course.
Press the
Warm
or the
Cold
button until appears
in the display. Press the
Start
button.
Press the
Warm
or
Cold
button to select custom
number. (no1~20)
Press the
Start
button. The machine sets up the custom
mode, then advances to the next process automatically.
33. How to set custom program
Structure of
NOTE
• is available in OPL type.
• Select course
Cos1 : Hot
Cos2 : Warm
Cos3 : Cold
Cos4 : Delicates
• Wash time
• Rinsing times per cycle
• Rinse cycle
• Top spin speed
• Pre-wash
• Water level
• Rinse spin, spin only
• Non-stop wash
• Rinse spin enable
• Auto-dosing time