45
1
Remove pump outlet hose.
2
Remove tub pump bellows.
1
Loosen the nut.
2
Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
3
Remove cap(Remaining Hose).
4
Disconnect the wiring.
5
Three screws are unscrewed from the cabinet.
6
Remove the pump to arrow direction.
PUMP
HEATER
• Rating : 240V 50Hz
• Resistant : 162~176Ω
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
CAUTION
To Next Page
Loading...
