LG F1495BDS1 - Page 23

23
1. Press the Power button.
2. Touch the Spin button to select RPM.
3. Press the Start/Pause.
Spin only
• By touching the Temp. button the water
temperature can be selected.
- Cold
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Temp.
■ Options ■ Other functions
How to use washer
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
NOTE
1. Press the Power button.
2. Select the Refresh program.
3. Press the Steam Wash button
repeatedly until the correct item is
displayed.
4. Press the Start/Pause button.
Refresh Cycle
For better performance load 3 item or
less. When Refresh cycle finishes,
laundry will continue to be tumbled
slowly for up to 30 minutes to prevent
wrinkling. You can open the door in
this time by pressing any button.
NOTE
• Medic Rinse : For best results or for
cleaner rinsing.
• Rinse+Spin : This can be helpful in
preventing fresh stains from setting in
fabrics. This is a separate cycle.
Option1
• Time Save : This option can be used to
reduce the time of a wash program.
• Intensive : If the laundry is normal and
heavily soiled, “Intensive” option is effective.
Option2
• Rinse
+
+Hold : Add rinse once then after
rinsing process, the course is paused until
start button is pressed again.
• Normal+Hold : The course is paused until
start button is pressed again when rinse is
finished.
• Rinse
++
: Add rinse twice.
• Rinse
+
: Add rinse once.
Rinse
1. Press the Power button.
2. Select a cycle.
3. Touch the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
Rinse+Spin