To Next Page
M
Michael RogersAug 10, 2025
How to check the inlet valve for dry on LG Washer?
- SStephen HerringAug 10, 2025
To check the inlet valve for dry on your LG Washer, press the Start/Pause button 7 times.
How to check the inlet valve for dry on LG Washer?
To check the inlet valve for dry on your LG Washer, press the Start/Pause button 7 times.
How to check the inlet valve for hot water on LG F1496AD1 Washer?
To check the inlet valve for hot water on your LG Washer, press the Start/Pause button 6 times.
How to check if the heater turns on during test mode on LG F1496AD1?
To check if the heater turns on during test mode on your LG Washer, press the Start/Pause button 9 times to see if the heater turns on for 3 seconds.
How to check the inlet valve for main wash on LG F1496AD1?
To check the inlet valve for the main wash on your LG Washer, press the Start/Pause button 5 times.
How to check the inlet valve for prewash on LG F1496AD1?
To check the inlet valve for prewash on your LG Washer, press the Start/Pause button 4 times.
Explains how Fuzzy Logic senses temperature, selected temperature, and laundry amount to optimize washing time.
Guides users on selecting wash programs using the dial, listing available courses from Cotton to Cupboard Dry.
Steps to follow before servicing, including asking the customer, checking adjustments, and referring to troubleshooting.
Instructions for entering and using the Load Test Mode to check various washer functions through button presses.
Procedure to check water level frequency by pressing Pre Wash and Spin buttons simultaneously.
Method to check thermistor temperature by pressing Medic Rinse and Spin buttons simultaneously.
Lists error codes (IE, OE, FE, PE, dE, UE, tE, LE, AE, PF, dHE) with their symptoms and causes.
Flowchart for troubleshooting the 'Water Inlet Error (IE)' by checking taps, hoses, connectors, and inlet valve resistance.
Troubleshooting steps for issues where the washing machine does not power on, checking plug, voltage, and circuit breaker.
Guidance on resolving vibration and noise during the spin cycle, focusing on removal of transit bolts and base packing.
Troubleshooting steps for water leaks originating from the dispenser tray, checking for damage or incorrect detergent placement.
Further troubleshooting for dispenser leaks, focusing on gasket/door cleanliness, damage, and inlet hose condition.
General
