LG F1410SW - User Manual

Questions and Answers

M
Michael BoothAug 11, 2025
Why does my LG F1410SW Washer show UE UNBALANCE ERROR?
- E
  Elizabeth LangAug 11, 2025
  The UE UNBALANCE ERROR on your LG washer typically means the load is unbalanced. This can happen because the clothes are too wet at the end of the cycle or because the load is too small. To fix this, rearrange the load to allow proper spinning, close the door, and press the Start/Pause button. If the load is too small, add 1 or 2 similar items or smaller articles of clothing to help balance the load. Close the door and press the Start/Pause button again. Remember, the door must be locked before the spin cycle can begin.
T
Travis StevensAug 17, 2025
Why does my LG F1410SW Washer show a UE UNBALANCE ERROR?
- C
  Carla RichardsonAug 17, 2025
  If you encounter a UE UNBALANCE ERROR on your LG Washer, it could be due to the laundry being too wet at the end of the cycle. Try rearranging the load to allow for proper spinning. Then, close the door and press the Start/Pause button. It might take a moment for the appliance to begin spinning, as the door must be locked first. Alternatively, if the load is too small, adding one or two similar or smaller items can help balance it. Again, close the door and press Start/Pause.
M
Michael MillerAug 25, 2025
What to do if my LG F1410SW Washer shows a 1E INLET ERROR?
- M
  Mark MarshallAug 25, 2025
  If your LG Washer displays a 1E INLET ERROR, it indicates a problem with the water supply. First, check another tap in your house to ensure the water supply is adequate. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them, or reinstall the hose if necessary. Also, check and clean the filter of the inlet hose. Finally, if you have an aqua stop supply hose and notice water leakage with a red indicator, replace the hose.
C
Charles BellAug 29, 2025
What to do if my LG Washer shows 1E INLET ERROR?
- Y
  yjacksonAug 29, 2025
  If your LG washer displays a 1E INLET ERROR, it indicates a water supply issue. Here's what you can do: * Check if the water supply is adequate by testing another tap in the house. * Ensure the water supply tap is fully open. * Make sure the water supply hoses are not kinked; straighten them or reinstall the water inlet hose. * Inspect and clean the inlet valve filter after turning off the taps and disconnecting the hoses from the washing machine.
L
Luke ClarkSep 4, 2025
How to fix OE WATER OUTLET ERROR on LG Washer?
- R
  Ruth RobertsSep 4, 2025
  If you're getting an OE WATER OUTLET ERROR on your LG Washer, the drain hose may be kinked or clogged. Clean and straighten the drain hose. Also, the drain filter might be clogged, so check and clean that as well.

LG F1410SW Specifications

General

Type	Front Load
Energy Rating	A+++
Spin Speed	1400 RPM
Weight	62 kg
Color	White
Noise Level (Wash)	54 dB
Programs	14
Delay Start	Yes
Child Lock	Yes
Inverter Motor	Yes
Dimensions (HxWxD)	850 x 600 x 550 mm