13
Time Delay & Beep ON/OFF
• Press the button when reservation washing
is needed.
• When the button is pressed, [ ] is
displayed, maximum delay of [ ] hours
can be set.
•
Each press advances time delay by the hour.
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from
the present to the completion of washing.
•
The Beep on/off function can be set by
pressing and holding the Time Delay button
(About 3 seconds)
.
The Beep on/off function can be set at any time
and it is automatically cancelled in the event of
a power cut.
The Beep on/off function also works when
power is off.
Power button
• Press the button to turn power on and off.
• Press the button to cancel the time delay.
Spin Button
• By pressing the Spin Button the spin speed
can be chosen
• F1496ADP3
Rinse Hold/No spin/400/800/1400
LED display
• Display the estimated remaining time
(Hour : Minute) to finish.
• In case of abnormal operation, error indications are
displayed.
( )
• See troubleshooting guide.
Water temperature selector
• Press the button to select water temperature.
• 60°C is selected for Cotton and Baby Care
only.
• By pressing the button while operating the
washer, the present temperature is displayed.
To Next Page
Loading...
Need help?
General
