Over Flow Error (FE)
Is the water coming in
drawer continuously ?
Replace the Main PCB .
After power off for 10 sec. and power on.
Does the water level over reference line and Is
not the water level frequency 25.5Khz or 26.1Khz ?
Or does
not the water level over reference line and is the water level frequency 25.5Khz or 26.1Khz?
F1496ADP3
Press
“
Spin ” and “Pre Wash ”
Replace the Inlet Valve assembly .
YES
If FE is displayed again,
then replace the
Pressure Switch .
If FE is displayed again,
then replace the
Main PCB .
Check the Air Chamber and the Tube (clogged).
NO
NO
YES
To Next Page
Loading...
