28
Enxaguamento (Rinse)
Enxaguar
+
+Espera (Rinse
+
+Hold)
Add rinse once then after rinsing process, the course is
paused until Inicio/Pausa button is pressed again.
Normal+Espera (Normal+Hold)
The course is paused until start button is pressed again
when rinse is nished.
Enxaguamento++(Rinse++)
Add rinse twice.
Enxaguamento+ (Rinse+)
Add rinse once.
Centrifugação (Spin)
•
Spin speed level can be selected by pressing the
Centrifugação button repeatedly
.
•
Spin Only
1
Press the Ligar/Desligar button.
2
Press the Centrifugação button to select RPM.
3
Press the Inicio/Pausa button.
Temperatura (Temp.)
The Temperatura button selects the wash and rinse
temperature combination for the selected cycle. Press
this button until the desired setting is lit. All rinses use
cold tap water.
•
Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
Child Lock ( )
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
1
Press and hold the Lavagem and Enxaguamento
button for 3 seconds.
2
A beeper will sound, and ‘ ’ will appear on the
display.
When the child lock is set, all buttons are locked
except the Ligar/Desligar button.
NOTE
•
Turning off the power will not reset the child lock
function. You must deactivate child lock before
you can access any other functions.
Unlocking the control panel
Press and hold the Lavagem and Enxaguamento
button for 3 seconds.
•
A beeper will sound and the remaining time for the
current programme will reappear on the display.
Sinal Sonoro (Buzzer On/Off)
1
Press the Ligar/Desligar button.
2
Press the Inicio/Pausa button.
3
Press the Sinal Sonoro button set the buzzer on/
off function.
NOTE
•
Once the Buzzer on/off function is set, the setting
is memorized even after the power is turned off.
•
If you want to turn the Beeper off, simply repeat
this process.
To Next Page
Loading...
Need help?
General
