What to do if my LG Washer displays UE unbalance error?
If your LG Washer shows a UE Unbalance Error, it might be due to an unbalanced load. If clothes are too wet, rearrange the load for proper spinning, close the door, and press Start/Pause. If the load is too small, add 1 or 2 similar items to balance it, then close the door and press Start/Pause. The door must be locked for the spin cycle to start.
How to fix 1E inlet error on LG Washer?
If your LG Washer displays a 1E Inlet Error, it means the water supply is not adequate. First, check another tap in the house to confirm water availability. Then, ensure the water supply tap is fully open. Also, inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Finally, the inlet valve filter may be clogged; turn off the taps, remove the hose connections, and clean the filter.
General| Type | Front Load |
|---|---|
| Capacity | 9 kg |
| Energy Rating | A+++ |
| Spin Speed | 1400 RPM |
| Color | White |
| Energy Efficiency Class | A+++ |
| Noise Level (Spinning) | 74 dB |
| Inverter Direct Drive | Yes |
| Dimensions (HxWxD) | 850 x 600 x 540 mm |
To Next Page
