20
OPERATION
Time and Status Display
e
Extra Options and Functions
• To use the extra functions, press and hold the corresponding button for 3 seconds. The
corresponding symbol lights up in the display.
• This allows you to select an additional programmes and will light when selected.
i
Child Lock
Use this option to disable the controls. This function can prevent children from changing cycles
or operating the appliance.
y
Tub Clean
This is a special function to help clean the inside of the appliance by soaking, washing, rinsing
and spinning.
f
Display
• The display shows the settings, estimated remaining time, options, and status messages.
When the appliance is turned on, the default settings in the display will illuminate.
• While the load weight is sensed automatically, the display on the control panel blinks.
Description
a
Estimated Time Remaining
• When a washing programme is selected, the default time for that programme is displayed.
This time will change as options are selected.
• If the display shows
---
, then the time will be displayed after the load sensing has detected
the load size. This is normal.
• The time shown is only an estimate. This time is based on normal operating conditions.
Several external factors (load weight, room temperature, incoming water temperature, etc.)
can affect the actual time.
b
p
lights up when the
Spin
button is pressed.
c
°C
lights up when the
Temp.
button is pressed.
Description
To Next Page
Loading...
Need help?
General
