D
dustin01Sep 5, 2025
What to do if there is a kinked drain hose on LG F4WV909P2S?
- TTina ClarkSep 5, 2025
If you have a kinked drain hose on your LG Washer, ensure that the drain hose is not kinked to allow proper drainage.
To Next PageTo Next PageWhat to do if there is a kinked drain hose on LG F4WV909P2S?
If you have a kinked drain hose on your LG Washer, ensure that the drain hose is not kinked to allow proper drainage.
Why does my LG F4WV909P2S show a 1E INLET ERROR?
If your LG Washer displays a 1E INLET ERROR, it indicates a water supply issue. Start by checking another tap in your house to ensure adequate water supply. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, check and clean the filter of the inlet hose. If you find water leakage in the aqua stop supply hose and the indicator is red, replace the aqua stop supply hose.
What to do if my LG Washer displays an OE WATER OUTLET ERROR?
If your LG Washer is showing an OE WATER OUTLET ERROR, the drain hose might be kinked or clogged, so clean and straighten it. Also, the drain filter might be clogged, so check and clean the drain filter.
How to fix OE water outlet error on LG F4WV909P2S Washer?
If you're experiencing an OE WATER OUTLET ERROR with your LG Washer, start by cleaning and straightening the drain hose to ensure there are no kinks or blockages. Then, check and clean the drain filter, as a clogged filter can also cause this error.
What to do if controls are not set properly on LG F4WV909P2S Washer?
If the controls on your LG Washer are not set properly, make sure that the cycle is correctly set. Close the door and press the Start/Pause button.
How do I fix FF frozen failure on my LG F4WV909P2S Washer?
If your LG Washer shows an FF FROZEN FAILURE error, the supply/drain hose or drain pump might be frozen. Pour warm water into the drum to unfreeze the drain hose and pump, and cover the supply hose with a wet, warm towel.
General
