EasyManua.ls Logo

LG F4WV910P0 - User Manual

LG F4WV910P0
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved
OWNER'S MANUAL
WASHING
MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is installed correctly
and safely. Leave these instructions near the product after installation for future
reference.
EN ENGLISH
F4V910*TS FV90JNS2Q F4WV910P(0~9) F4WV910P2S
F4V909*TS F4WV909P(0~9) FV90VNS2Q
MFL69478486
Rev.03_032119

Table of Contents

Questions and Answers

  • A
    Amy HopkinsSep 6, 2025
    Why does my LG Washer show a 1E INLET ERROR?
    • A
      Andrew GarciaSep 6, 2025
      If your LG Washer displays a 1E INLET ERROR, it indicates a water supply issue. Start by checking another tap in your house to ensure adequate water supply. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, check and clean the filter of the inlet hose. If you find water leakage in the aqua stop supply hose and the indicator is red, replace the aqua stop supply hose.
  • M
    Marissa MitchellAug 22, 2025
    Why does my LG F4WV910P0 Washer show a UE UNBALANCE ERROR?
    • M
      Matthew GibsonAug 22, 2025
      The UE UNBALANCE ERROR in your LG Washer can occur if the laundry load is too wet at the end of the cycle. To resolve this, rearrange the load to allow proper spinning, then close the door and press the Start/Pause button. It may take a moment for the appliance to begin spinning, as the door must be locked first. Another cause is a load that is too small. Try adding one or two similar items or smaller articles of laundry to help balance the load. Close the door and press Start/Pause button again.
  • C
    Carl SmithSep 3, 2025
    What to do if the door is open on LG F4WV910P0 Washer?
    • K
      Kevin AllenSep 3, 2025
      If the door of your LG Washer is open, close it and ensure that nothing is caught under the door preventing it from closing completely.
  • B
    Brenda LeeSep 2, 2025
    Why is my LG Washer making a rattling noise?
    • E
      enicholsSep 2, 2025
      If your LG Washer is making a rattling or clanking noise, there may be foreign objects like keys, coins, or safety pins in the drum. Stop the appliance and check the drum for these objects. If the noise continues after restarting, call for service.
  • J
    John Russell PhDSep 1, 2025
    Why does my LG Washer make a thumping sound?
    • K
      Kyle HillSep 1, 2025
      A thumping sound in your LG Washer is often normal with heavy wash loads. However, if the sound persists, the appliance might be out of balance. Stop the appliance and redistribute the wash load.
  • R
    Randy HolmesAug 30, 2025
    Why does my LG F4WV910P0 Washer not operate?
    • D
      Donald TravisAug 30, 2025
      If your LG Washer isn't operating, first check if the control panel has powered off due to inactivity and press the Power button to turn it on. Next, ensure the appliance is securely plugged into a working outlet. Finally, verify that the water supply is turned on completely.
  • W
    wyattkarenAug 29, 2025
    What to do if my LG F4WV910P0 Washer shows OE WATER OUTLET ERROR?
    • A
      austinronaldAug 29, 2025
      The OE WATER OUTLET ERROR on your LG Washer means there's an issue with the water draining. This can happen if the drain hose is kinked or clogged, so clean and straighten the drain hose. Also, the drain filter might be clogged. Check and clean the drain filter to resolve this issue.
  • A
    Alisha HernandezAug 27, 2025
    How to fix 1E INLET ERROR on LG F4WV910P0?
    • J
      Jenna JamesAug 28, 2025
      The 1E INLET ERROR on your LG Washer indicates that the water supply is not adequate. First, check another tap in the house to ensure the water supply is sufficient. Make sure that the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, the filter of the supply hoses might be clogged, so check and clean the filter. If water leakage occurs in the aqua stop supply hose, replace it.
  • J
    Jason MitchellAug 26, 2025
    What to do if my LG F4WV910P0 shows UE unbalance error?
    • R
      Rachel MorenoAug 27, 2025
      If your LG Washer displays a UE UNBALANCE ERROR, it could be due to the laundry being too wet or the load being too small. To resolve this, rearrange the load to allow proper spinning, then close the door and press the Start/Pause button. If the load is too small, add one or two similar items to help balance it, then close the door and press Start/Pause. Note that the door must be locked before spin can be achieved.
  • A
    Ashley JohnsonAug 25, 2025
    Why is my LG F4WV910P0 leaking water?
    • X
      xfosterAug 25, 2025
      If your LG Washer is leaking, the house drain pipes may be clogged; unclog the drain pipe or contact a plumber if necessary. Alternatively, leakage may be caused by improper installation or a clogged drain hose, so clean and straighten the drain hose and check/clean the drain filter regularly.

LG F4WV910P0 Specifications

General IconGeneral
BrandLG
ModelF4WV910P0
CategoryWasher
LanguageEnglish

Related product manuals