37
OPERATION
ENGLISH
3
Press the
Dispenser 1
button to light up the
b
Link indicator.
• The
a
Liquid detergent indicator is always
light on.
• When the
b
Link indicator is selected, the
Dispenser 2
button cannot be operated.
4
Press and hold the
Dispenser 1
and
Dispenser
2
buttons at the same time for 3 seconds to
save the changes.
Setting the Dispenser 2 for Different Liquid
Detergent Dispenser
1
Press the
Power
button.
2
Press and hold the
Dispenser 1
and
Dispenser
2
buttons at the same time for 3 seconds.
3
Press the
Dispenser 2
button to light up the
c
Liquid detergent indicator.
4
Press and hold the
Dispenser 1
and
Dispenser
2
buttons at the same time for 3 seconds to
save the changes.
Cleaning the ezDispense pumping
system
Use this function to change the type of detergent
or softener. This function cleans residual detergent
or softener in the hose connected to the
ezDispense
a
(when changing the type of
detergent or softener).
• Run this function once a month (or more often if
needed) to remove detergent buildup and other
residue.
• If you do not clean the
ezDispense
compartment, detergent or softener will be
remained in the connected hose.
• Using this function may cause some foam in the
drum.
1
Wash the
ezDispense
compartment that
needs to be cleaned. Please refer to
Cleaning
the Appliance Periodically
in
MAINTENANCE
chapter for further details.
2
Fill the water in compartment to be cleaned up
to the
MAX
line.
3
Press the
Power
button.
4
Press and hold the
Spin
button for 3 seconds to
clean the connected hose. When this option is
selected,
dcL
appears on the display.
5
Press the
Dispenser 1
or
Dispenser 2
button
to select the compartment to be cleaned up.
• Both compartments can be cleaned at the
same time.
6
Press the
Start/Pause
button. Finishes this
function within 16 minutes.
Settings
Child Lock
Use this option to disable the controls. This
function can prevent children from changing cycles
or operating the appliance.
To Next Page
Loading...
