10
DVD Mini Hi-Fi System ] USER GUIDE
Adjust the settings - more you can do
Adjust the language settings
OSD– Select a language for the Setup menu and on-screen display.
Disc Audio/Subtitle/Disc Menu – Select a language for the
Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then
SELECT/ENTER to enter the corresponding
4-digit number according to the language code list in the reference chapter .
If you make a mistake while entering number, press CLEAR to delete num-
bers then correct it.
[OFF] (for Disc Subtitle): Turn off Subtitle.
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
Adjust the setting
ON REMOTE
1. Display setup menu: SETUP
2. Select a desired option on the first level:
vv VV
3. Move to second level:
BB
4. Select a desired option on the second level:
vv VV
5. Move to third level:
BB
6.Change the setting:
vv VV
and
SELECT/ENTER
OSD Initial language setting (Optional)
1. Turn the power on:
Appear the language list display
window
2. Select the language :
3. Press:
4.To confirm press:
ON PLAYER
11
STANDBY/ON
ON REMOTE
11
POWER
vv VV
bB
SELECT/ENTER
SELECT/ENTER
After factory setting ,this beginning menu language will only be displayed at
DVD or USB mode if you turn on the power at the first time.
Initial Setting the Area Code (Optional)
1. Display setup menu:
2. Select LOCK menu on the first
level:
3. Move to second level: Appears the
activated Area code on the second
level.
4. Move to third level:
5. Enter the new pass word and
then, press:
6. Recheck entered new pass word
and then, press:
7. Select a code for a geographic
area: After select,Rating and
Password will be activated.(page 20)
ON REMOTE
SETUP
vv VV
BB
BB
Numerical button of
0~ 9 then, SELECT/ENTER
Numerical button of
0~ 9 then, SELECT/ENTER
vv VV
bB
After factory setting ,To set the Area code you have to as below.
To Next Page
Loading...
Need help?
General
