How to stop my LG FH2J3TDN Washer from making rattling noises?
Rattling and clanking noises in your LG Washer could be due to foreign objects like coins or safety pins in the drum or pump. Check all pockets to ensure they are empty, as items like clips, matches, pens, coins, and keys can damage the washer and clothes. Close zippers, hooks, and drawstrings to prevent snagging or tangling.
How to fix LG FH2J3TDN if water doesn't enter or enters slowly?
If water isn't entering your LG Washer or is entering slowly, check the following: * Ensure the water supply is adequate by checking another tap in the house. * Make sure the water supply tap is completely open. * Check for any kinks in the water supply hose(s) and straighten them. * Inspect the filter of the supply hose(s) for clogs.
What to do if LG FH2J3TDN Washer leaks water?
If your LG Washer is leaking water, check if the supply or drain hoses are loose at the tap or washing machine and tighten the hose connections. Also, inspect your house drain pipes for clogs and unclog them, or contact a plumber if needed.
Why doesn't the water drain from my LG Washer?
If the water in your LG Washer isn't draining or is draining slowly, the drain hose might be kinked or clogged, so clean and straighten it. Also, the drain filter might be clogged, so clean the drain filter.
What to do if LG FH2J3TDN will not spin?
If your LG Washer won't spin, make sure the door is firmly shut. Close the door and press the Start/Pause button. Note that it may take a few moments before the washing machine begins to spin. The door must be locked before spin can be achieved. You can also add 1 or 2 similar items to help balance the load or rearrange the load to allow proper spinning.
What if the supply/drain hose or drain pump of my LG FH2J3TDN Washer is frozen?
If the supply/drain hose or drain pump of your LG Washer is frozen, supply warm water into the drum and unfreeze drain hose and drain pump. Wet a towel in warm water and apply to supply hose.
Why is softener dispensed too early in my LG FH2J3TDN?
Premature dispensing of softener in your LG Washer may occur if too much softener is used. Follow the guidelines provided by the detergent manufacturer. Also, close the dispenser drawer slowly and do not open the drawer during the wash cycle.
What to do if there is an overload in motor of LG FH2J3TDN?
If there is an overload in the motor of your LG Washer, allow the washing machine to stand for 30 minutes to allow the motor to cool, then restart the cycle.
What to do if my LG Washer water does not enter or enters slowly?
If water isn't entering your LG Washer, or is entering slowly, check if the water supply in your location is adequate by testing another tap in the house. Ensure the water supply tap is fully open and that the water supply hoses aren't kinked; straighten them if they are. Also, inspect the filter of the supply hoses for clogs.
What if the buttons on my LG FH2J3TDN Washer don't function properly?
If the buttons on your LG Washer aren't functioning properly, it might be because the door is open. Press the buttons again after closing the door.
General| Model | FH2J3TDN |
|---|---|
| Spin Speed | 1200 RPM |
| Energy Rating | A+++ |
| Dimensions (W x D x H) | 600 x 550 x 850 mm |
| Motor | Inverter Direct Drive |
| Color | White |
| Inverter Motor | Yes |
| Type | Front Loader |
To Next Page
