What to do if my LG Washer/Dryer displays an OE water outlet error?
The OE water outlet error on your LG Washer/Dryer indicates a drainage problem. The drain hose may be kinked or clogged, so clean and straighten it. Also, the drain filter might be clogged; check and clean the drain filter.
Why does my LG FWV685SSE Washer/Dryer show a UE unbalance error?
The UE error on your LG Washer/Dryer typically indicates an unbalanced load. This can occur if the laundry is too wet at the end of the cycle. Try rearranging the laundry to allow proper spinning, then close the door and press the Start/Pause button. It may also happen if the load is too small. In this case, add one or two similar items to help balance the load, then close the door and press the Start/Pause button. Remember, the door must be locked before a spin can be achieved.
How to fix 1E inlet error on LG FWV685SSE?
The 1E inlet error on your LG Washer/Dryer indicates a water supply issue. First, check if the water supply is adequate by checking another tap in the house. Ensure that the water supply tap is completely open. Also, inspect the water supply hoses for any kinks and straighten them if necessary, or reinstall the water inlet hose. Finally, check and clean the filter of the inlet hose, as it may be clogged.
General| Brand | LG |
|---|---|
| Model | FWV685SSE |
| Category | Washer/Dryer |
| Language | English |
To Next Page
