What to do if my LG FWV917WTS shows an OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG Washer/Dryer usually indicates a problem with the drain hose or drain filter. This error appears when the drain hose is either kinked or clogged, or if the drain filter is clogged. To fix this, begin by cleaning and straightening the drain hose. Also, check and clean the drain filter.
Why does my LG FWV917WTS show a UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer/Dryer typically occurs because the laundry load is unbalanced. This can happen if the load is too wet at the end of the cycle or if the load is too small. To resolve this, rearrange the laundry to allow proper spinning. If the load is too small, add one or two similar items to help balance it. Then, close the door and press the Start/Pause button. Please note that it may take a few moments before the appliance begins to spin, and the door must be locked before spin can be achieved.
How to fix a 1E INLET ERROR on my LG Washer/Dryer?
The 1E INLET ERROR on your LG Washer/Dryer indicates an issue with the water supply. This could be due to inadequate water supply, a water supply tap not being fully open, kinked water supply hoses, or clogged supply hose filters. First, check another tap in the house to ensure adequate water supply. Then, fully open the water supply tap. Next, straighten any kinked water supply hoses or reinstall the water inlet hose. Finally, check and clean the filter of the inlet hose. If water leakage occurs in the aqua stop supply hose, and the indicator becomes red, replace the aqua stop supply hose.
Explains safety symbols, warnings, and general precautions for safe appliance use.
Covers safe usage by children, power cords, ventilation, installation, and operation guidelines.
Specific safety advice for using the dryer function, including item preparation and drying limitations.
How to use the Smart Diagnosis feature for troubleshooting with the customer centre.
Lists error codes like IE, DE, UE and their potential causes and solutions.
Covers other error codes, operational issues, and common appliance noises.
Solutions for dry problems, poor drying performance, wrinkling, staining, and odors.
General| Extra dry | Yes |
|---|---|
| Half-load | No |
| Drying capacity | 7 kg |
| Washing capacity | 10.5 kg |
| Delay start (max) | 19 h |
| Spin-drying class | A |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 48 dB |
| Anti-Crease function | - |
| Noise level (drying) | 52 dB |
| Cycle time washing & drying | 789 min |
| Door hinge | Left |
| Water fill | Cold |
| Drum volume | 68 L |
| Control type | Rotary, Touch |
| Display type | LCD |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Appliance placement | Freestanding |
| Annual water consumption washing | 12000 L |
| Annual energy consumption washing & drying | 7.14 kWh |
| Door opening angle | 150 ° |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Water consumption washing per cycle | - L |
| Energy consumption washing per cycle | - kWh |
| Water consumption washing & drying per cycle | 143 L |
| Energy consumption washing & drying per cycle | 1.37 kWh |
Weight and Dimensions| Depth | 560 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
| Weight | 73000 g |
| Package depth | 655 mm |
| Package width | 660 mm |
| Package height | 885 mm |
| Package weight | 77000 g |
To Next Page
