3
Notes on Water Resistant
Properties
This product is water and dust resistant in compliance with
the Ingress Protection rating IP68.
Your product has undergone testing in a controlled
environment and is proven to be water and dust resistant
in certain circumstances (meets the requirements of
classicationIP68asdescribedbytheinternationalstandard
IEC 60529 - Degrees of Protection provided by Enclosures
[IPCode];testconditions:15-35ºC,86-106kPa,1.5meter,
for30minutes).Donotexposethedeviceinconditionsthat
are different from the test conditions. Results may vary in
actual use.
WARNING
In conditions that are different from LGE’s test conditions
forIP68(asspeciedinthismanual),theliquiddamage
indicator located inside the product changes colour. Please
note that any damages that occur due to such causes makes
you ineligible for any free-of-charge repair services provided
under warranty.
Avoidexposingtheproducttoenvironmentswithexcessive
dusts or moisture. Do not use the product in the following
environments.
Do not immerse the product in any liquid chemicals
(soap, etc.) other than water.
Do not immerse the product in salt water, including
seawater.
Do not immerse the product in a hot spring.
Do not swim with this product.